Mpc 4000, pro tools, piano, USB, fantom

[comewithitt]

Ok...Please someone help me. I have a fantom x6 and a mpc4000. when I record a track in a sequence on my mpc4000 from my Piano when i change the piano sound say to saxophone from piano it change every track i have recorded in piano mode to saxophone. How do I make one sound say sax stay on track one and grand piano sound on track 2 and another sound on track 3 in the same sequence?


Also what is the best way to set the mpc4000 with the fantom x6?


How do I plug my mpc4000 to my G5 and get it lined up with my pro tools?



how can I put every track on my pro tools track by track? Its really hard for me to line it up so it stay on beat.

[misscc]

Follow my guideline below.
Connecting a Keyboard to the MPC:

Keyboard Settings:
MIDI OUT to MPC MIDI IN
Local Control OFF
Make sure its in Multi-Mode
Route Audio Outs(headphone out if stereo out isnt available) to your Mixer

MPC Settings:
MIDI OUT to Keyboard MIDI IN
Turn DRUM to MIDI 1A or 1B(most likely 1A)
Route Audio OUTS(stereo outs or headphone out) to your mixer

Cables Required:MIDI(2) and Audio Cables(depends on how many outs the gear has)

Example:
Say you have a bass on the keyboard and it is on Channel 2(track 2 for some keyboards with onboard sequencers)

Then the MPC should be set to MIDI:2A

So basically whatever the sound in the keyboard is the number should be the same on the MPC.

Channel 1 or Track 1=MIDI 1A
Channel 2 or Track 2=MIDI 2A

ect....

Real simple and easy.


Nicole